 |
 |
 |
|
| Machine &
General Data |
| Welding range |
40mm-160mm |
| PN weldable |
PN 2.5 - 8 |
40-160 |
| PN 10 - 12.5 |
40-110 |
| Voltage |
230V 50Hz |
| Power |
1.3 Watt |
| Weight |
57Kg |
|
Workshop manually operated butt welding machine for
PE and PP pipes and fittings.
 |
The pivoting clamps allows the machine
to fabricate segmented bends with different
radii, up to 7.5 degrees per side. |
|
The machine being capsizable into
the frame reduced the overall dimensions for transport
and stocking when not in use. |
|
Two carriages mounted on roller bearings,
one fixed the other moveable on chrome plated slide
bars dia. 25mm. |
|
The operating lever moves the trolley,
and acts on a calibrated scale in order to apply
the correct welding pressure to the PE pipe
/ fittings to be welded. |
|
Electric cutting mill with micro switch
control on the handle running over on a slide bar. |
|
Removable PTFE coated heating mirror
with special housing located on the machine, running
over on a slide bar. |
|
Right and left clamps dia. 160mm rotating
up to 7.5 degrees highly suitable for short spigot
fittings. |
|
Reducing rings for the main clamps
dia. 40, 50, 63, 75, 90, 110, 125 and 140mm. |
images and data courtesy of
ITS
|
