Worldpoly offers a complete range of PE pipe welding accessories to ensure you have everything you need on site to get the job done correctly and efficiently. From pipe rollers to debeaders, we have accessories to cover you from 40mm all the way up to 3000mm.

Butt Wipes

ButtWipes assist with the necessary preparation of equipment surfaces and pipe ends, in order to ensure freedom from contaminants as is necessary for a successful welding process.

ButtWipes

ButtWipes assist with the necessary preparation of equipment surfaces and pipe ends, in order to ensure freedom from contaminants as is necessary for a successful welding process. Contains 1 tub of 75 x >85% Isopropyl Alcohol wipes.

Data Loggers

Temperature Sensor - Infrared

Temperature sensor. Fluke infrared hand-held. Rugged, reliable, able to be recalibrated if required.

SPG 2.0 Data Logger

The SPG 2.0 data logger is made for easy and safe welding process control, and report generation pursuant to ISO 12176 SLP Standard. 10,000+ welds are recorded, with output to USB and printing to Excel. It's control software ships with configurations for many third-party systems already installed. Therefore, the logger constitutes as an upgrade for manually operated welding machines to achieve ISO-compliant recording, error handling, and welding process control. At every step in the welding process, the SPG 2.0 indicates the nominal and the actual values of the welding pressures and times, to walk the welder operating the hydraulic unit easily and correctly through the process. The unit thereby achieves the optimum welding process, in line with nationally applicable standards, as affecting both heating element temperatures and welding pressures and times.

WPD DataMaster

A Data Logger for fast, accurate monitoring and recording of weld values under DVS and POP003 both low and high pressure welding. The Data Logger can be universally used with any Worldpoly butt-welding machine and with all hydraulically operated machines. It is possible to capture all the data needed to evaluate the quality of a welding operation (including plate temperature) and to transfer them to a printer or a PC. Memory holds up to 1000 weld cycles, and provides a good weld / bad weld advice for each weld.

External Debeaders

Debeader External 63-125mm

These tools have been designed to remove the external bead from a butt-fusion welded joint. The tool knocks on to the pipe bead, then alignment blocks slide against the pipe surface to guide it around the pipe. They have a blade that cuts under the bead, but does not damage the surface of the pipe. A handle helps pull the tool around the pipe, cutting the bead away. These tools are fully approved to the UK National Grid specifications GIS/PL2-5 and have been accepted for use on their gas networks and pipes.

Debeader External 63-400mm

These tools have been designed to remove the external bead from a butt-fusion welded joint. The tool knocks on to the pipe bead, then alignment blocks slide against the pipe surface to guide it around the pipe. They have a blade that cuts under the bead, but does not damage the surface of the pipe. A handle helps pull the tool around the pipe, cutting the bead away.

Debeader External 400-1200mm

These tools have been designed to remove the external bead from a butt-fusion welded joint. The tool knocks on to the pipe bead, then alignment blocks slide against the pipe surface to guide it around the pipe. They have a blade that cuts under the bead, but does not damage the surface of the pipe. A handle helps pull the tool around the pipe, cutting the bead away. These tools are fully approved to the UK National Grid specifications GIS/PL2-5 and have been accepted for use on their gas networks and pipes.

Internal Debeaders

Debeader Internal

Internal debeaders supplied by Worldpoly are manufactured in Scandinavia to the highest standards. Although the internal beads are small and rounded causing little disturbance to flow, bead removal is sometimes required in order to comply with a clients' contract. They have a capacity from Ø 90 up to Ø 630 mm / 3" to 24", and from SDR / DR 11 to 41. If beads thicker than SDR/DR 11 are to be removed, please contact sales@worldpoly.com for advice, and it is important to note that beads must be removed within the first 50% of the standard weld cooling time. This set consists of 6 pcs of alloy rods 2.15 meters each, one acting as a turn handle. 6 different pcs of centre rings are included to ensure that the first rod is aligned in the pipe. Alloy rods are delivered in a special carrying bag with a handle. 6 different debeader heads are available to suit inside diameters, and the internal debeader rod set can be extended up to 24 meters with the purchase of extra rods.

Pipe Secateurs

PolyRollers

PolySlings

PolySling500/20

Australian made 4 roller sling suitable from 150 to 500mm / 6" to 20" OD HDPE pipe. The sling is supplied tested and tagged with a safe working load. PolySling500/20 has a wire capacity of 3000 kg / 3 US Tons.

PolySling1000/40

Australian made 6 roller sling suitable from 160 to 1000mm OD PE pipe. The sling is supplied load tested and tagged with a safe working load. PolySling has a wire load capacity of 4000 kg. 5m eye to eye.

Squeeze-Offs

SqueezeOff32

These tools have been designed to restrict the flow of gas or water in a plastic pipe, while a repair is carried out. They squeeze the pipe down to a set amount, as defined in the UK National Grid specification GIS/PL2-7.To ensure the pipe is not damaged during operation, the tool is fitted with rotatable profiles that set the correct gap. The tools are manufactured from steel to ensure reliable operation under harsh operating conditions. The pipe is squeezed shut by two parallel bars, the top bar being moved by a manual operation tee handle, the bottom bar being removable to allow easier access for the pipe.

SqueezeOff63

These tools have been designed to restrict the flow of gas or water in a plastic pipe, while a repair is carried out. They squeeze the pipe down to a set amount, as defined in the UK National Grid specification GIS/PL2-7.To ensure the pipe is not damaged during operation, the tool is fitted with rotatable profiles that set the correct gap. The tools are manufactured from steel to ensure reliable operation under harsh operating conditions. The pipe is squeezed shut by two parallel bars, the top bar being moved by a manual operation tee handle, the bottom bar being removable to allow easier access for the pipe.

SqueezeOff90

These tools have been designed to restrict the flow of gas or water in a plastic pipe, while a repair is carried out. They squeeze the pipe down to a set amount, as defined in the UK National Grid specification GIS/PL2-7.To ensure the pipe is not damaged during operation, the tool is fitted with rotatable profiles that set the correct gap. The tools are manufactured from steel to ensure reliable operation under harsh operating conditions. The pipe is squeezed shut by two parallel bars, the top bar being moved by a manual operation tee handle, the bottom bar being removable to allow easier access for the pipe. 55, 63, 75 & 90 SDR11

SqueezeOff125

These tools have been designed to restrict the flow of gas or water in a plastic pipe, while a repair is carried out. They squeeze the pipe down to a set amount, as defined in the UK National Grid specification GIS/PL2-7.To ensure the pipe is not damaged during operation, the tool is fitted with rotatable profiles that set the correct gap. The tools are manufactured from steel to ensure reliable operation under harsh operating conditions. The pipe is squeezed shut by two parallel bars, the top bar being moved by a manual operation tee handle, the bottom bar being removable to allow easier access for the pipe. Must specify before ordering if the range needed is: 63, 75, 90, 110 & 125mm SDR21 63 & 90mm SDR11, 63, 75, 90 & 125mm SDR17 or 63, 90, 110 & 125mm SDR11 & 17

FIND YOUR LOCAL WORLDPOLY DISTRIBUTOR