PolyForce24i Tracked

0mm, 0mm, 12", 24"

Worldpoly PolyForce24i Tracked Fusion Machine. Manufactured in Australia.

Arguably the fastest, safest, most consistent butt welding machine available. Thanks to 5 years of research and development and Worldpolys' 60 years of PE pipeline experience, every weld is the same. PolyForce24i Tracked gives you complete control over welding by virtually removing operator variables.
The standard machine includes: Safety as first priority.
Two speed rubber tracks with cordless remote control.
Complete set of two-piece liners including 24", 22", 20", 18", 16", 14" & 12" IPS and/or 22", 20", 18", 16", 14" & 12" DIPS. External pipe lifters for operator safety.
Facing tool, heating plate and main clamps cannot crash.
On-board data logger.
Hands-free clamping of pipe.
Low-noise 1800 RPM diesel.

PolyForce24i Tracked HDPE Fusion Machine - Australian Made
Track mounted. Self contained and self propelled with cordless remote
Genuine 3 year International warranty
CNC welding according to ASTM F 2620-19 & ISO 21307-2017 Single High Pressure
Hydraulic in/out facing tool and heating plate with crash protection. No longer are these considered consumables
Hydraulic open/close/locking of main clamps without operator contact. Impossible to crash main clamps with facing tool and heating plate.
Yanmar on-board, low-noise, low fuel consumption 1800 RPM diesel
Simple operation. Automatic or manual butt fusion. 20,000+ weld data logging included. 3.5 second changeover time for 630mm (24") SDR 11 in Automatic mode
Locally serviceable.
Pipe clamps prevent slippage even under extreme conditions, which is detected by the machine in case of undersized pipe
External hydraulic pipe lifters front and rear for operator safety
Industry Standard track assembly, Bridgestone specification rubber tracks, two-speed, automatic braking when stopped
Butt welding unit easily removed for site and trench work
Long operating time thanks to 1800 RPM low-noise diesel - 12 hours under normal welding conditions
Australian made, built tough, locally serviceable, low-noise. Just what you've been looking for
Capacity 12" to 24" IPS or DIPS. Includes two-piece clamp inserts for pipe and fittings diameters 24", 22", 20", 18", 16" 14" & 12" IPS are included
Welded steel machine frame and tracked base
Rated lifting points on welding machine and frame, optional spreader bar
Maximum pump operating pressure - 200 bar / 20 MPa
Total cylinder section - 3660mm2, 7200mm2 or 13,000mm2
Fuel capacity - 70 litres
Engine - Yanmar 2216 cc, 4 cylinder, 1800 RPM low-noise diesel. Tier 4 for North America.
Weight - 3800 kg

Technical specifications subject to change without notice. Please check at time of order confirmation.

Please talk with us about your butt welding needs. We need to know what you plan to weld with your new Worldpoly equipment so that we can recommend the most cost effective solution. We pride ourselves in helping to improve your bottom line.

Enquire Now

FIND YOUR LOCAL WORLDPOLY DISTRIBUTOR