PolyForce500i Tracked

200mm, 500mm, 0", 0"

Worldpoly PolyForce500i Tracked.
Australian Made.

The fastest, safest, most consistent and economical butt welding machine available. Thanks to ongoing research and development with Bosch Rexroth and Worldpolys' 60+ years of PE pipeline experience, every weld is the same. PolyForce500i Tracked gives you complete control over welding by removing operator variables.
Providing both high and low pressure welding to ASTM, ISO, Australian/New Zealand, DVS, WIS and Fast Weld, Fast Fusion compatible.
Fully automatic heating, changeover and cooling cycle following entry of welding standard, pipe diameter and wall thickness or DR, automatic detection of pipe slippage, hands-free hydraulic locking of main clamps.
Intuitive CNC controls are easier to use than a smart-phone, 5 second automatic changeover after heating, the safest machine on the market with keyed hydraulic lockout and Cat-3 E-stops, restricted operator entry to potential danger zones, internal 20,000+ weld data logger, two speed rubber tracks, external pipe lifters and IoT option; this is today's way to weld PE and PP pipe systems from 500mm to 200mm.
Todays' fusion machine to take your business to the next level.

PolyForce500i Tracked HDPE Fusion Machine - Australian Made
Track mounted. Self contained and self propelled
Genuine 3 year International warranty
CNC welding according to the following Standards:
- ASTM F-2620-19
- ISO 21307-201 Single Low Pressure
- ISO 21307-201 Dual Low Pressure
- ISO 21307-201 Single High Pressure
- POP003 Single Low Pressure
- POP003 Dual Low Pressure
- POP003 Single High Pressure
- DVS 2207-1-2007
- WIS 4-32-08 Single Pressure Welding
- WIS 4-32-08 Dual Pressure Welding
- WIS 4-32-08 UKWIR Fastweld
Hydraulic in/out facing tool and heating plate.
Hydraulic locking of main clamps without operator contact.
On-board Yanmar, low-noise, low fuel consumption 1800 RPM generator. 70 dB at operator position
Simple operation. Automatic or manual butt fusion. 20,000+ weld data logging included. 5 second changeover time for 500mm SDR 11 in Automatic mode
Pipe clamps prevent slippage even under extreme conditions, which is detected by the machine in case of undersized pipe
External hydraulic pipe lifters front and rear
Track assembly takes Bridgestone rubber tracks, two-speed, 30+ degree capacity, automatic braking when stopped
Butt welding unit easily removed for site and trench work
Long operating time thanks to 1800 RPM low-noise diesel - 12 hours under normal welding conditions
Australian made, built tough, locally serviceable, low-noise. Just what you've been looking for
Clamp options:
Capacity 200 to 500mm OD. Includes two-piece clamp inserts for pipe and fittings diameters 450, 400, 355, 315, 280, 250, 225 & 200mm, and stub device, are included.
Electric start with engine management on operator side
Welded steel machine frame and tracked base
Rated lifting points on welding machine and frame, optional spreader bar
Maximum pump operating pressure - 200 bar / 20 MPa
Fuel capacity - 70 litres
Engine - 1.3 litre turbo 3 cylinder Yanmar 1800 RPM low-noise diesel
Weight - 3,600kg. This is a tough, well engineered long-term machine.

Technical specifications subject to change without notice. Please check at time of order confirmation.

Please talk with us about your butt welding needs. We need to know what you plan to weld with your new Worldpoly equipment so that we can recommend the most cost effective solution. We pride ourselves in helping to improve your bottom line.

Enquire Now