PolySaw4824-48in
Hydraulically operated pipe saw specifically produced for the preparation of pipe segments in PE, PP and other thermoplastic materials, used for the production of bends, tees and other fabrications.
Capacity 24 – 48″. Cutting angle is up to 67 degrees. Lowering rate of saw is hydraulically controlled, as are the top-mounted V-clamps used to hold pipe segments in place. Saw blade made in Germany.
See In Action
Specifications
General
- Cutting range 24 – 48″
- Simple operation
- Hydraulic lock/release of main pipe
- Cutting feed is hydraulically controlled
- Laser blade positioning
- Emergency stop at operation panel
- All electric operating buttons and handles are operated at 24DCV
- Before saw blade is running，it alarms with both a flashing light and audible alarm for a few seconds
- Equipped with saw blade detection device. Once saw blade is broken, machine will stop immediately
- Saw blade guides expand and contract automatically once pipe diameter and fitting types has been selected, assuring close contact with pipe for blade protection
- Saw guide travel is limited by proximity switches
- Pipe or fitting is locked by hydraulic controlled bar – easy, safe and reliable
- Low pipe bed design, providing easy and safe reception of cut pieces
- Special saw blade available for thick walled pipe
- 67.5 degree maximum cutting angle allows production of segments for bends, tees and Y-branch tees
- Speed of saw blade 250 m/min
- CE approved by SGS www.sgs.com
Included as standard (unless otherwise specified):
- German saw blade
- Tool box including tools, bolts, selected spare parts, etc.
Options
Options include:
- Safety fence for machine
- Spare blades
Hydraulics
- Accepts 40~50 kinematic viscosity hydraulic oil
Electrical
Voltages available include:
- 400 volt 3 phase 50 Hz (5.5 Kw 4.2 A)
- 460/3/60
- 220/3/60
